Pinta Pyramid
The texture increases the surface area, delivering good sound absorption values in the medium to high frequency range.
Pyramid – The classic sound absorber
Does your factory suffer from intolerable noise? Do your employees quickly become stressed or tired? Noise is sound which causes annoyance and damages health. This can lead to disorders such as high blood pressure and hearing difficulties. Reduce sound in your factory, classroom or any other room where high noise levels predominate, and comply with the latest EU directives.
Pinta PYRAMID is a highly effective, attractively designed sound absorption product. The texture increases the surface area, delivering good sound absorption values in the medium to high frequency range.
Installation advice
We recommend using the adhesives below for adhesion of pinta SONEX to the following surfaces:
- Porous surfaces, such as wood, brick or concrete: pinta accoustic adhesive D
- Smooth, non-porous surfaces such as steel panels or PVC: pinta acoustic adhesive S
Gloves should be worn when installing pinta SONEX, to avoid getting dirt on the panels. The absorbers can be cut with a sharp knife. We recommend laying the absorbers with a shadow gap of up to 20mm, to achieve an optimum appearance.
Pinta acoustic adhesive D
Field of application
Adhesion of pinta absorbers (exept A2 products) to porous interior surfaces.
Features
Pinta acoustic adhesive D is ready for use and bonds immediatly. Nevertheless, absorbers can be adjusted within 5 minutes after laying. Pinta acoustic adhesive D securely adheres to concrete, miniral plasters, brickwork and boards made of gypsum, plasterboards and gypsum fibers as well as wooden particle boards (manufacturer’s instructions must be followed).
Shelf life
At least 12 months when stored in a dry, frost-free place in unopened original packaging.
Lowest film formation temperature
Approx +4°C.
Working temperature range
From approx +5° to approx. +25°C. Generally, pinta accoustic adhesive D must not be exposed to sub-zero temperatures.
Surfaces
Surfaces must be even, clean, dry, solid, stable and free of dust, oil and wax. In particular, wallpapers and coats of paint must be removed. Surfaces with insufficient stability, e.g. loose plasters, must be undercoated using a commercially available primer thinned with water in a ratio of 1:1. Uneven surfaces must be smoothed. We recommend carrying out an adhesion test.
Application
Using a toothed putty-knife (size 2-3), pinta acoustic adhesive D is applied to the whole surface area. The absorbers are pressed on and aligned. Fresh spots of adhesive must be wiped off with water. During and after adhesion of pinta products, good ventilation must be ensured so that the adhesive sets quickly.
Consumption
1.2 to 1.5 kg/m2 for whole-area adhesion.
Please note
We recommend carrying out an adhesion test
Fields of application
Pinta acoustic adhesive S is a polydimethylsiloxane based adhesive and is particularly suitable for bonding pinta absorbers to smooth, non-porous surfaces.
Features
Pinta acoustic adhesive S is ready for use and bonds immediately. Nevertheless, absorbers can be adjusted within 5 minutes after laying. Pinta acoustic adhesive S adheres securely to surfaces such as steel panels, trapezoidal sheet metal and PVC.
Shelf life
12 months when stored in a dry, cool and frost-free place in unopened original packaging.
Working temperature range
From approx. +5°C to approx +40°C. Generally, pinta acoustic adhesive S must not be exposed to sub-zero temperatures.
Skin formation
Within 5 minutes at +23°C and 50% relative humidity.
Temperature resistance
From -50°C to +180°C
Surface pre-treatment
Surfaces must be stable, clean, dry and free of oil and grease
Application
Pinta acoutstic adhesive S is applied to the surface in strips. The number of strips depends on the product and the size of the absorbers.
Consumption
Approx 0.5 cartridge pr m2
Please note
We recommend carrying out an adhesion test
